Fuel Injector Cleaning Diagnosis Machine:S-6E

1)Aluminum parts made by mold,good looking and more durable. 2)Automatic return oil to fuel tank.

                                     Model:S-6E Fuel Injector Cleaning&Diagnosis Machine 

Introduction:      

                                           

1.Injector cleaner and tester integrates the most advanced control technology and environmental concepts. Test and clean all kinds of automotive inector by simulating engine working conditions and can also on-vehicle clean the fuel injector.

2.The units used for checking and cleaning the auto fuel injector and is the first choice for autos maintenance,curing,even the department of auto teching and research.

 Functions:

1.Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector.

2.Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector,and to monitor the spraying status.This test is also for reserve flush.

3.Leakage test: To test the sealing and dribbling condition of injectors under system pressure.

4.Injecting flow test: To check the injecting amount of injector.

5.Auto test: To test injector by simulating different working conditions.

6.On-vehicle cleaing: The unit is equipped with various adaptors and couplers that facilate cleaning on the injector on vehicle.

Features:

1.If use new type injector,just need choose the matched connector and replace the O-ring.

2.Bosch oil pump made in German..

3.6 cylinder,separate large power ,high frequency stainless steel ultrasonice cleaner.

4.Automatic drainage is controlled by solenoid valve,to realize uniformity test of various injector.

5.Overtime automatically protect system,ensure machine safty operation.

6.It uses environmental protective and safe test fluid,and cleaning detergent, innocuous,with no peculiar smell, non-volatile and can be reclaimed repeatedly and effective.It’s innocuous with the operators.

7.The bright backlights make it convenient to observe the injector’s working situation.

8.Full-ulaminium oil board frame make machine higher grade.

9.It adopts united design of microcomputer skill and intelligent engine, and suppose driving power and specified injecting protection system. Ensure to safty operate the test and clean at any mode such as high resistor,low resistor,electric voltage and electric current.

10.Use the latest grid sand PVC key pannel, let operation is clear.

11.Signals input lines are used for the sensor of simulate input.

12.The powerful ultrasonic cleaning through(100W) can clean several injector at the same time,reverse flush and ultrasonic wave cleaning.

13.You can adjust the time,frequency,injecting times.

14.The liquid level of the oil box be shown,and the testing agent can be used circularly.

15.Automatically simulate and diagnose the overall process during continuous injection, idle speed,medium speed,high speed and variable speed,use the latest high precision time counting-down and times counting-down style.

Technical Parameter

Fuel Injector Cleaning Diagnosis Machine:S-6E